4V330C-10 3/8'' Pneumatic Control Solenoid Valves Two Coils Double Control Automation Components
Pneumatic solenoid valves are widely used in industrial robots. The robot's actions are all done with solenoid valve control cylinders.Industrial robot is a multi-joint manipulator or multi-degree of freedom machine device for the industrial field, which can automatically perform the work. The instruction signal is transmitted to the driving mechanism to enable the actuator to reproduce various actions of teaching.Greatly reduce the utilization of human resources and improve industrial efficiency.
Technical data of 4V330C-10 pneumatic control solenoid valve in CNC automation machinary:
| Models | 4V310-10 | 4V320-10 | 4V330C-10 | 4V330E-10 | 4V330P-10 |
| Position number | Two positions Five ways | Three positions Five ways |
| Operating medium | 40 Mircon litered Air |
| Action type | Internally pilot action |
| Wiring Form | Lead wire or Connector type |
| Packing dimension | 13.52x2.7x4cm | 19.04x2.7x4cm | 20.94x2.7x4 cm |
| Highest action frequency | 5 cycles/ 1 second |
Internal structure diagram of 4V330C-10 pneumatic solenoid valve automation products:
Production environment and equipment of 4V330C-10 pneumatic solenoid valves in automation system:
Packing and delivery of 4V330C-10 pneumatic solenoid valve for automatic machines:
How do Industrial robots working with 4V pneumatic solenoid valve?
Industrial robots are classified into two types: programming input type and teaching input type. The programming input type is to transfer the programmed program files on the computer to the robot control cabinet through RS232 serial port or Ethernet communication.
There are two teaching methods for teaching input type: one is that the operator uses a manual controller (teaching operation box) to transmit the command signal to the drive system, so that the actuator can perform the required action sequence and motion trajectory. The other is that the operator directly leads the actuator and performs it according to the required sequence of motions and motion trajectories. At the same time as the teaching process, the information of the working program is automatically stored in the program memory. When the robot automatically works, the control system detects the corresponding information from the program memory, and transmits the command signal to the drive mechanism, so that the actuator can reproduce the teaching. Various actions. The industrial robot that teaches the input program is called a teaching and reproducing industrial robot.
Industrial robots with tactile, force or simple vision can work in more complex environments; if they have recognition functions or further increase adaptive, self-learning functions, they become intelligent industrial robots. It can adapt to the environment according to the "macro" selection or self-programming given by people, and automatically complete more complicated work.
Welcome to your inquiry!
Product Tags:
|
|
3/8'' Pneumatic Solenoid Valves Two Coils Double Control Automation Components Images
|
